ADG728WBRUZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Additional Feature | 5 V NOMINAL VOLTAGE ALSO AVAILABLE |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG728 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Interface | 2-Wire, Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Operating Supply Current | 10μA |
| Power Dissipation | 100μW |
| Max Supply Current | 20μA |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 65MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 95ns, 85ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switch-on Time-Max | 200ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG728WBRUZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). Surface Mount is where this multiplexer is located. 8:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. As a result of its 8 channels, this electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with ADG728 if you are looking for variants. This digital multiplexer has 4.5Ohm internal resistance. The functions of 16 pins can be found in the datasheets. Users shouldn't supply more than 5.5V voltage to the switch device. An effective Single supply digital multiplexer. 2.7V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 10μA would be sufficient for this switch device. Using a single voltage supply, this switch device consumes 2.7V~5.5V volts. Put voltage above 20μA on the multiplexer to cause damage. An analog IC with the number AUDIO/VIDEO SWITCH is integrated into this board. Operating the 8 inputs requires 8 inputs. There are various bandwidths available for data transfer. This electronic part has additional features, such as: 5 V NOMINAL VOLTAGE ALSO AVAILABLE. The Automotive series contains it.
ADG728WBRUZ-REEL7 Features
8 Channels
10μA Supply Current
Bandwidth: 65MHz
Additional Features: 5 V NOMINAL VOLTAGE ALSO AVAILABLE
ADG728WBRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG728WBRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- FTTH
- DVD-R
- Frame Relay Equipment
- Medical Instrumentation
- Microwave transmission systems
- Avionics
- Relay replacements
- Digital cross connects (DSX-1)
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Microprocessor controlled systems
