ADG729BRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | TIN LEAD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 95ns, 85ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switch-off Time-Max | 180ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG729BRU Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 4:1. Operational temperature extended around -40°C~85°C TA. In total, there have been 16 terminations. A electrical component with 4 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Unlike digital switches, these are based on SP4T switching circuits. There are 2 circuits in this switch device. Draining from a single voltage supply, this analog switch requires a voltage of 2.7V~5.5V. It is integrated with a AUDIO/VIDEO SWITCH analog IC.
ADG729BRU Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 100MHz
ADG729BRU Applications
There are a lot of Rochester Electronics, LLC ADG729BRU Analog Switches & Multiplexers ICs applications.
- Channel Banks
- High-Voltage
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Public switching systems
- Communications systems
- Relay Replacement
- T1/E1 Terminals
- Voice over IP/DSL – Integrated Access Devices, Smart
- Transmit
- Avionics
