ADG729BRUZ
| Parameters | |
|---|---|
| Number of Inputs | 8 |
| Bandwidth | 100MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 95ns, 85ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Drain to Source Resistance | 2.5Ohm |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG729 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Interface | 2-Wire, Serial |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Nominal Supply Current | 20μA |
| Power Dissipation | 100μW |
| Max Supply Current | 20μA |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
ADG729BRUZ Overview
This electronic part is conveniently packaged in 16-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. A high level of reliability can be achieved through the use of an advanced packaging method Tube. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 16 terminations. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. An electrical component of this type can be found in the 16 series. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this multiplexer. ADG729 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. The functions of 16 pins can be found in the datasheets. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. 2.7V is the lowest voltage that should be fed to the electronic electronic part. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. A voltage higher than 20μA may cause damage to the switch multiplexer. Integrated with an analog IC AUDIO/VIDEO SWITCH. The 8 inputs need to be operated in order to work. 100MHz-bandwidths can be used to transfer data between multiplexers. There is 2.5Ohm resistance between the Drain and Source on this part. It can conduct in a 4-bit manner.
ADG729BRUZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 100MHz
Drain-to-Source resistance: 2.5Ohm
4-Bit
ADG729BRUZ Applications
There are a lot of Analog Devices Inc. ADG729BRUZ Analog Switches & Multiplexers ICs applications.
- Avionics
- Fault Tolerant Systems
- Central office
- Access Concentrators
- Medical Instrumentation
- Avionics and Military Systems
- FTTH
- SONET
- Transmit
- SDH/SONET multiplexers
