ADG731BCP_REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad, CSP |
| Number of Pins | 48 |
| Operating Temperature | -40°C~80°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG731 |
| Pin Count | 48 |
| Number of Channels | 32 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Number of Inputs | 32 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 18MHz |
| On-State Resistance (Max) | 5.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 32:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 260pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Signal Current-Max | 0.03A |
| Length | 7mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
ADG731BCP_REEL7 Overview
Packed in 48-VFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. 32:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~80°C TA. Totally, there are 48 terminations. A 32 channel electronic part produces high-quality output. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. As part of the design of the 48 series, this electronic part has been incorporated into the system. There are 1 circuits in this multiplexer. Use ADG731 to search for variants of the digital switches. Datasheets for 48 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. It is recommended to use 1.8V as the lowest voltage for the electrical part. There is an integrated analog IC SINGLE-ENDED MULTIPLEXER in the module. The electrical component supports 32 inputs.
ADG731BCP_REEL7 Features
32 Channels
-3db Bandwidth: 18MHz
ADG731BCP_REEL7 Applications
There are a lot of Analog Devices Inc. ADG731BCP_REEL7 Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- Private Branch Exchange (PBX)
- Signal routing between systems
- Cable PC
- Fiber to the Home
- PBX interfaces
- Automotive applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Microwave transmission systems
- Microprocessor controlled systems
