ADG731BSUZ
| Parameters | |
|---|---|
| Interface | Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 10μA |
| Power Dissipation | 100μW |
| Number of Inputs | 32 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 18MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| On-State Resistance (Max) | 5.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 32:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 260pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 75ns |
| Drain to Source Resistance | 5.5Ohm |
| Signal Current-Max | 0.03A |
| Height | 1mm |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG731 |
| Pin Count | 48 |
| Operating Supply Voltage | 5V |
| Number of Channels | 32 |
ADG731BSUZ Overview
The electronic component is convenient to ship overseas because it is packed in a 48-TQFP. The advanced packaging method Tray provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 32:1. Extended operating temperature around -40°C~85°C TA. The total number of terminations is 48. The electronic part delivers high-quality output through its 32 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. An electrical component of this type can be found in the 48 series. There are 1 circuits in this switch device. Try searching for the analog switch ic with ADG731 if you are looking for variants. In this multiplexer, the internal resistance is 5.5Ohm. The datasheets for the 48 pins explain the functions. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 5.5V in normal situations. 1.8V should be the lowest voltage fed to the electronic component. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. A voltage of 5V can be used to operate the electronic component. There are 32 inputs to be operated. The transfer of data can be performed over 18MHz bandwidths. A Drain to Source resistance of 5.5Ohm is shown for this electronic part.
ADG731BSUZ Features
32 Channels
Bandwidth: 18MHz
Drain-to-Source resistance: 5.5Ohm
ADG731BSUZ Applications
There are a lot of Analog Devices Inc. ADG731BSUZ Analog Switches & Multiplexers ICs applications.
- Industrial and process control systems
- Imaging
- Cable PC
- New designs requiring multiplexer functions
- DSUs
- Routers
- PBX interfaces
- Automotive applications
- High-Voltage
- DSLAMs
