Parameters |
Number of Channels |
32 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Nominal Supply Current |
20μA |
Power Dissipation |
100μW |
Number of Inputs |
32 |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Bandwidth |
18MHz |
Supply Current-Max (Isup) |
0.02mA |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Turn-Off Delay Time |
16 ns |
On-State Resistance (Max) |
5.5Ohm |
High Level Output Current |
30mA |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
32:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
13pF 275pF |
On-state Resistance Match-Nom |
0.3Ohm |
Charge Injection |
1pC |
Crosstalk |
-72dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
37ns |
Switch-off Time-Max |
35ns |
Drain to Source Resistance |
4Ohm |
Normal Position |
NO |
Signal Current-Max |
0.03A |
Height |
1mm |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
48-TQFP |
Surface Mount |
YES |
Number of Pins |
48 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tray |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
48 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
4Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
100μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG732 |
Pin Count |
48 |
Operating Supply Voltage |
5V |
ADG732BSUZ Overview
The electronic component is convenient to ship overseas because it is packed in a 48-TQFP. High reliability is achieved by using advanced packaging method Tray. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 32:1 represents the number of circuits. Around -40°C~125°C TA is the extended operating temperature. Totally, there are 48 terminations. A electrical component with 32 channels is capable of high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. An electrical component of this type can be found in the 48 series. There are 1 circuits in this switch device. Using the ADG732 search parameter, you can discover variants of the switch. A 4Ohm internal resistance characterizes this multiplexer. The functions of 48 pins can be found in the datasheets. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. There should be 1.8V voltage fed to the electrical part below 1.8V. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. This electrical part is compatible with 5V operating voltages. There are 32 inputs to be operated. 18MHz-bandwidths can be used to transfer data between multiplexers. The Drain to Source resistance of this electronic component is 4Ohm.
ADG732BSUZ Features
32 Channels
Bandwidth: 18MHz
Drain-to-Source resistance: 4Ohm
ADG732BSUZ Applications
There are a lot of Analog Devices Inc. ADG732BSUZ Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Industrial
- Relay Replacement
- USB 1.1 signal switching circuits
- Avionics and Military Systems
- SONET/SDH ADM
- Communications systems
- Multi-Line E1 Interface Cards
- T1/E1 Terminals
- Wireless Local Loop