ADG732BSUZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 5.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG732 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 32 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 10μA |
| Power Dissipation | 100μW |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 18MHz |
| Supply Current-Max (Isup) | 0.02mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 16 ns |
| On-State Resistance (Max) | 5.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 32:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 275pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Charge Injection | 1pC |
| Crosstalk | -72dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 37ns |
| Switch-off Time-Max | 26ns |
| Signal Current-Max | 0.03A |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG732BSUZ-REEL Overview
The electrical component comes in 48-TQFP packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 32:1 is the ratio of multiplexer to demultiplexer circuits. Increasing operating temperature to around -40°C~125°C TA. In total, there are 48 terminations. A electrical component with 32 channels is capable of high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. 48 pins are injected to the electronic part body. Circuits number 1 make up this analogue multiplexer. Using the ADG732 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 5.5Ohm. Please refer to the datasheets for 48 pins functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. 1.8V should be the lowest voltage fed to the electronic component. In order to operate this switch device, it would need a current of 10μA. It can operate from 5V operating voltages. It is possible to transfer data over a 18MHz-bandwidth.
ADG732BSUZ-REEL Features
32 Channels
10μA Supply Current
Bandwidth: 18MHz
ADG732BSUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG732BSUZ-REEL Analog Switches & Multiplexers ICs applications.
- Video switching
- Private Branch Exchange (PBX)
- Fiber In The Loop (FITL)
- Low-Voltage
- High speed data transmission line cards
- Modems
- 65 V DACs
- FTTH
- Wireless Local Loop
- Industrial
