ADG733BRQ-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 2.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG733 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 21ns, 10ns (Typ) |
| Charge Injection | 5pC |
| Crosstalk | -67dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9022mm |
| RoHS Status | Non-RoHS Compliant |
ADG733BRQ-REEL Overview
The electronic component is convenient to ship overseas because it is packed in a 16-SSOP (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). It is mounted in the position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. High-quality output is provided by the electronic component's 3 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 16 series, this electronic part has been incorporated into the system. Based on SPDT switching circuits, these analog multiplexers work. Search with ADG733 if you are looking for analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. 1.8V should be the lowest voltage fed to the electronic component. This electrical component also includes additional features such as ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. A analog switch ics with 6 outputs is included.
ADG733BRQ-REEL Features
3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
ADG733BRQ-REEL Applications
There are a lot of Analog Devices Inc. ADG733BRQ-REEL Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Public switching systems
- Precision test equipment
- High speed data transmission line cards
- Industrial and process control systems
- Intelligent PBX
- Imaging
- Channel Banks
- Precision data acquisition
- Audio and video signal routing
