ADG733BRQ-REEL7
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 3 |
| Supply Voltage | 2.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG733 |
| Pin Count | 16 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Number of Channels | 3 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 21ns, 10ns (Typ) |
| Charge Injection | 5pC |
| Crosstalk | -67dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Length | 4.9022mm |
| RoHS Status | Non-RoHS Compliant |
ADG733BRQ-REEL7 Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 2:1. Operating temperature around -40°C~85°C TA extended. Total terminations are 16. The electronic part delivers high-quality output through its 3 channels. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. It is part of the design of the 16 series that this electronic component is included. A SPDT switching circuit is used for these analog switches. Look for analog switch ic variants by searching with ADG733. It has an internal resistance of 4.5Ohm. You can find the functions of the 16 pins in the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. 1.8V is the lowest voltage the electrical component should receive. You shouldn't miss the additional features of the electrical component, such as: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. The analog switch ics includes 6 outputs.
ADG733BRQ-REEL7 Features
3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
ADG733BRQ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG733BRQ-REEL7 Analog Switches & Multiplexers ICs applications.
- Avionics
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Precision instrumentation
- Data Acquisition Systems
- Automotive applications
- Modems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Cable Modem
- Transmit
- Audio and video switching
