ADG733BRQZ
| Parameters | |
|---|---|
| Number of Channels | 3 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Test Frequency | 1MHz |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 34 ns |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 160MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 12 ns |
| Max Dual Supply Voltage | 2.75V |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Min Dual Supply Voltage | 2.25V |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 72 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 21ns, 10ns (Typ) |
| Charge Injection | 5pC |
| Crosstalk | -67dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 4.5Ohm |
| Height | 1.65mm |
| Length | 5mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG733 |
| Pin Count | 16 |
| Number of Outputs | 6 |
ADG733BRQZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-SSOP (0.154, 3.90mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 2:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. In total, there have been 16 terminations. As a result of its 3 channels, this electronic component provides high-quality output. A 2.5V voltage supply should turn on and run the electronic component. The electrical component body receives 16 pins. These analog multiplexers are built based on SPDT switching circuits. If you are looking for variants of the digital switch, trying search with ADG733. This digital multiplexer has 4.5Ohm internal resistance. To find out what the 16 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. normally, users should not supply switches with voltages higher than 5.5V. The digital multiplexer has a low cost Dual, Single supply. The lowest voltage the electronic part should receive is 1.8V. 1nA current would be enough for this multiplexer to operate. The analogue multiplexer may be damaged if voltage is greater than 1μA. Despite this switch's dual supply capability, its voltage should not exceed 2.75V. With dual power supplies, you should attach at least 2.25V. 160MHz bandwidths enable data to be transferred. Additional features of the electronic component include: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. Drain to Source resistance for this electronic component is 4.5Ohm. The analog switch ics has 6 outputs.
ADG733BRQZ Features
3 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 4.5Ohm
ADG733BRQZ Applications
There are a lot of Analog Devices Inc. ADG733BRQZ Analog Switches & Multiplexers ICs applications.
- Isolation
- Automatic test equipment
- Digital Cross-Connects
- Cable Modem
- Cable PC
- 65 V DACs
- RGB switches
- Central office
- Battery-powered systems
- Audio/video switches
