Parameters |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
3 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG733 |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Number of Channels |
3 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
1MHz |
Operating Supply Current |
1nA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Turn On Delay Time |
34 ns |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Supply Type |
Dual, Single |
Bandwidth |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Turn-Off Delay Time |
12 ns |
Max Dual Supply Voltage |
2.75V |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
4.5Ohm |
Min Dual Supply Voltage |
2.25V |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
11pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
21ns, 10ns (Typ) |
Charge Injection |
5pC |
Crosstalk |
-67dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Length |
4.9022mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SSOP (0.154, 3.90mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
ADG733BRQZ-REEL Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~85°C TA. In total, there are 16 terminations. As a result of its 3 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.5V voltage supply. 16 pins are injected to the electronic part body. Based on SPDT switching circuits, these analog multiplexers work. Try searching for ADG733 variants of the analog switch ic. Analog switches have 4.5Ohm internal resistance. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. It is recommended to use 1.8V as the lowest voltage for the electrical part. The switch device would be able to operate with 1nA current. Put voltage above 1μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 2.75V. In the case of dual power supplies, you should connect at least 2.25V. The data can be transferred over a wide range of bandwidths, called 160MHz bandwidths. This electrical component also includes additional features such as ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. The analog switch ics has 6 outputs.
ADG733BRQZ-REEL Features
3 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
ADG733BRQZ-REEL Applications
There are a lot of Analog Devices Inc. ADG733BRQZ-REEL Analog Switches & Multiplexers ICs applications.
- ATM
- Digital Cross-Connects
- Digital access cross connects
- PDH Multiplexers
- High-Voltage
- Avionics and Military Systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cross Connects
- Power routing
- Cell phones