Parameters |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
4.5Ohm |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
11pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
21ns, 10ns (Typ) |
Charge Injection |
5pC |
Crosstalk |
-67dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Height Seated (Max) |
1.2mm |
Length |
5mm |
RoHS Status |
Non-RoHS Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Additional Feature |
ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
3 |
Supply Voltage |
2.5V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG733 |
Pin Count |
16 |
Number of Outputs |
6 |
Qualification Status |
Not Qualified |
Number of Channels |
3 |
ADG733BRU Overview
Presented in 16-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. This electronic part offers high-quality output due to its 3 channels. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. Use ADG733 to search for variants of the digital switches. This digital multiplexer has 4.5Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 5.5V in normal situations. In order for the electronic part to function properly, the lowest voltage should be 1.8V. This electronic part has additional features, such as: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. The analog switch ics includes 6 outputs.
ADG733BRU Features
3 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
ADG733BRU Applications
There are a lot of Analog Devices Inc. ADG733BRU Analog Switches & Multiplexers ICs applications.
- PCMCIA cards
- Intelligent PBX
- Industrial control systems
- PDH Multiplexers
- FTTH
- Access Concentrators
- RGB switches
- Microwave transmission systems
- Remote Powered Equipment
- Audio and video switching