ADG733BRUZ-REEL

21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG733 16 Pins 100pA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG733BRUZ-REEL
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 883
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG733 16 Pins 100pA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG733
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Number of Channels	3
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	200MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG733BRUZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. There are 16 terminations totally. The electronic part provides high-quality output because it has 3 channels. An 2.5V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. These analog multiplexers are built based on SPDT switching circuits. Try searching with ADG733 to find analog multiplexer variants. In this multiplexer, the internal resistance is 4.5Ohm. Datasheets for functions of 16 pins are available. Theswitch device is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Dual, Single supply type digital switch with a low cost. A low voltage of 1.8V should be applied to the electronic component. An operating current of 1nA would be sufficient for this switch device. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 2.75V. With dual power supplies, you should attach at least 2.25V. It is possible to transfer data over a 160MHz-bandwidth. Don't forget the additional features of this electronic part, such as: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. The analog switch ics has 6 outputs.

ADG733BRUZ-REEL Features

3 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY