ADG733BRUZ-REEL7

21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG733 16 Pins 100pA 2.5V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG733BRUZ-REEL7
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 954
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG733 16 Pins 100pA 2.5V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.5V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG733
Pin Count	16
Number of Outputs	6
Qualification Status	Not Qualified
Number of Channels	3
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	200MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG733BRUZ-REEL7 Overview

The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~85°C TA. There are 16 terminations totally. This electronic part offers high-quality output due to its 3 channels. When the electronic component is given a voltage of 2.5V, it should be turned on and run. Into the electrical component body are injected 16 pins. Based on SPDT switching circuits, these analog multiplexers work. Try searching for the analog switch ic with ADG733 if you are looking for variants. This digital multiplexer has 4.5Ohm internal resistance. The datasheets for the 16 pins explain the functions. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. The digital multiplexer has a low cost Dual, Single supply. 1.8V should be the lowest voltage fed to the electronic component. For this digital switch to work, 1nA current would suffice. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 2.75V. It is recommended that you attach at least 2.25V to your dual power supply. 160MHz bandwidths enable data to be transferred. Don't miss this electronic component's additional features, such as: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. Multiplexer ics with 6 outputs are available.

ADG733BRUZ-REEL7 Features

3 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY