ADG734BRU

21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG734 20 Pins 100pA 2.5V 20-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG734BRU
Package: 20-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 624
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG734 20 Pins 100pA 2.5V 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-TSSOP (0.173, 4.40mm Width)
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG734
Pin Count	20
Number of Outputs	8
Polarity	Non-Inverting
Power Supplies	3/5/+-3V
Number of Channels	4
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Operating Supply Current	1nA
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	200MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
High Level Output Current	30mA
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-67dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	35ns
Switch-off Time-Max	16ns
Height	1.05mm
Length	6.5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG734BRU Overview

The electrical component comes in 20-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 20. A 4 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 2.5V voltage supply. This electrical component is included in the 20 series of products. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG734 to find analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. For functions related to 20 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 1.8V should be applied to the electronic component. The switch device would be able to operate with 1nA current. The analogue multiplexer may be damaged if voltage is greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 2.75V. If you are using a dual power supply, you should attach at least 2.25V. It is possible to transfer data over a 160MHz-bandwidth. The analogue multiplexer has 8 outputs.