Parameters |
Max Dual Supply Voltage |
2.75V |
-3db Bandwidth |
200MHz |
On-State Resistance (Max) |
4.5Ohm |
Min Dual Supply Voltage |
2.25V |
High Level Output Current |
30mA |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
72 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
11pF |
On-state Resistance Match-Nom |
0.1Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
21ns, 10ns (Typ) |
Charge Injection |
5pC |
Crosstalk |
-67dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
35ns |
Switch-off Time-Max |
16ns |
Height Seated (Max) |
1.2mm |
Length |
6.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 4 weeks ago) |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG734 |
Pin Count |
20 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Power Supplies |
3/5/+-3V |
Number of Channels |
4 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
1MHz |
Operating Supply Current |
1nA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Turn On Delay Time |
34 ns |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Supply Type |
Dual, Single |
Bandwidth |
160MHz |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Turn-Off Delay Time |
12 ns |
ADG734BRUZ-REEL Overview
Presented in 20-TSSOP (0.173, 4.40mm Width), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 20 terminations. As a result of its 4 channels, this electronic component provides high-quality output. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. It is injected into the electrical part body with 20 pins. A SPDT switching circuit is used for these analog switches. Try searching with ADG734 if you're looking for variants. This digital multiplexer has 4.5Ohm internal resistance. For functions related to 20 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. A low voltage of 1.8V should be applied to the electronic component. The switch device would be able to operate with 1nA current. A digital multiplexer may suffer damage if voltage is applied above 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 2.75V. It is recommended that you attach at least 2.25V to your dual power supply. In 160MHz-bandwidths, data can be transferred. In this digital multiplexer, there are 8 outputs.
ADG734BRUZ-REEL Features
4 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
ADG734BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG734BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- USB 1.1 signal switching circuits
- Video switching
- Imaging
- Channelized and Unchannelized DS3 applications
- Signal routing between systems
- DVD-R
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Voice over IP/DSL – Integrated Access Devices, Smart
- Cable PC
- Power routing