ADG736BRMZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 315mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG736 |
| Pin Count | 10 |
| Polarity | Non-Inverting |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 12 ns |
| Number of Inputs | 1 |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 5 ns |
| On-State Resistance (Max) | 4Ohm |
| High Level Output Current | 30mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 9pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 12ns, 5ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Max Junction Temperature (Tj) | 150°C |
| Drain to Source Resistance | 2.5Ohm |
| Signal Current-Max | 0.03A |
| Height | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG736BRMZ Overview
As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. The advanced packaging method Tube provides high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 2:1. Increasing operating temperature to around -40°C~125°C TA. In total, there have been 10 terminations. As a result of its 2 channels, this electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. 10 pins are injected to the electronic part body. A SPDT switching circuit is used to build these analog multiplexers. ADG736 can be used to search for analog multiplexer variants. This digital multiplexer has 4Ohm internal resistance. For functions related to 10 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. In order for the electronic part to function properly, the lowest voltage should be 1.8V. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. Put voltage above 1μA on the multiplexer to cause damage. The electrical component supports 1 inputs. 200MHz bandwidths enable data to be transferred. There is 2.5Ohm resistance between Drain and Source for this electronic part.
ADG736BRMZ Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
Drain-to-Source resistance: 2.5Ohm
ADG736BRMZ Applications
There are a lot of Analog Devices Inc. ADG736BRMZ Analog Switches & Multiplexers ICs applications.
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- New designs requiring multiplexer functions
- High-Voltage
- Medical Instrumentation
- ISDN NT1/TA
- High reliability control systems
- ATM
- Battery Powered Systems
- Remote wireless modules
- DVD-R
