ADG736LBRMZ-REEL7
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG736 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 16 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 8 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 82 dB |
| Current - Leakage (IS(off)) (Max) | 10pA Typ |
| Channel Capacitance (CS(off), CD(off)) | 9pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 12ns, 5ns (Typ) |
| Channel-to-Channel Matching (ΔRon) | 100m Ω |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
ADG736LBRMZ-REEL7 Overview
The electrical component comes in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. The operating temperature is extended to around -40°C~125°C TA. Totally, there are 10 terminations. The electronic part provides high-quality output because it has 2 channels. With a 3V voltage supply, the electrical component should be turned on and run. 10 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for the analog switch ic with ADG736 if you are looking for variants. This digital multiplexer has 4Ohm internal resistance. For details about the functions of 10 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. Users should never supply a voltage higher than 5.5V to a switch device. A cost-effective Single supply type analogue multiplexer. A low voltage of 1.8V should be applied to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. In this digital multiplexer, there are 4 outputs.
ADG736LBRMZ-REEL7 Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 200MHz
ADG736LBRMZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG736LBRMZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Audio/video switches
- Data switching
- High speed data transmission line cards
- Routers
- Audio signal routing
- Cellular phones
- SONET
- Precision data acquisition
- Automatic test equipment
