ADG738BRU
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG738 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Serial |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Power Dissipation | 100μW |
| Throw Configuration | DPST |
| Bandwidth | 65MHz |
| Turn-Off Delay Time | 10 ns |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 20ns, 10ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Switch-off Time-Max | 25ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Height | 1.05mm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADG738BRU Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. Electronic part bodies are injected with 16 pins. The circuits in this analogue multiplexer number 1. Look for analog switch ic variants by searching with ADG738. It has an internal resistance of 4.5Ohm. For details about the functions of 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. 2.7V is the lowest voltage the electrical component should receive. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. It is integrated with AUDIO/VIDEO SWITCH analog ICs. This electrical part is compatible with 5V operating voltages. 65MHz bandwidths enable data to be transferred.
ADG738BRU Features
8 Channels
Bandwidth: 65MHz
ADG738BRU Applications
There are a lot of Analog Devices Inc. ADG738BRU Analog Switches & Multiplexers ICs applications.
- Medical Instrumentation
- Voice over IP/DSL – Integrated Access Devices, Smart
- Digital cross connects (DSX-1)
- Precision instrumentation
- Fault Tolerant Systems
- 65 V DACs
- CSU
- Remote wireless modules
- Video signal routing
- High reliability control systems
