Parameters |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Interface |
Serial |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
AUDIO/VIDEO SWITCH |
Operating Supply Current |
10μA |
Nominal Supply Current |
20μA |
Power Dissipation |
100μW |
Max Supply Current |
20μA |
Throw Configuration |
DPST |
Turn On Delay Time |
20 ns |
Number of Inputs |
8 |
Bandwidth |
65MHz |
Turn-Off Delay Time |
10 ns |
On-State Resistance (Max) |
4.5Ohm |
High Level Output Current |
120mA |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
55 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
13pF 85pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Time (Ton, Toff) (Max) |
20ns, 10ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-75dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
70ns |
Switch-off Time-Max |
25ns |
Voltage - Supply, Single (V+) |
2.7V~5.5V |
Drain to Source Resistance |
2.5Ohm |
Height |
1.05mm |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
100μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG738 |
ADG738BRUZ Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. A total of 16 terminations have been recorded. The electronic part provides high-quality output because it has 8 channels. With a 3V voltage supply, the electrical component should be turned on and run. This electrical component is included in the 16 series of products. 1 circuits are used in this analogue multiplexer. Search with ADG738 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 4.5Ohm. For functions related to 16 pins, please refer to the datasheets. Multiplexer or Switches is a typical switch device. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. For this multiplexer to operate, 10μA current would be sufficient. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 20μA. With a AUDIO/VIDEO SWITCH analog IC integrated into the board. It can operate from 5V operating voltages. It is possible to operate 8 inputs. There are 65MHz bandwidths for data transfer. A Drain to Source resistance of 2.5Ohm is shown for this electronic part.
ADG738BRUZ Features
8 Channels
10μA Supply Current
Bandwidth: 65MHz
Drain-to-Source resistance: 2.5Ohm
ADG738BRUZ Applications
There are a lot of Analog Devices Inc. ADG738BRUZ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Precision data acquisition
- Automotive applications
- Precision test equipment
- Fault Tolerant Systems
- Cross Connects
- SONET/SDH ADM
- Isolation
- Avionics
- Intelligent PBX