Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
100μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG738 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Channels |
8 |
Interface |
Serial |
Number of Circuits |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.7V |
Analog IC - Other Type |
AUDIO/VIDEO SWITCH |
Operating Supply Current |
10μA |
Power Dissipation |
100μW |
Throw Configuration |
DPST |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
Bandwidth |
65MHz |
Turn-Off Delay Time |
10 ns |
On-State Resistance (Max) |
4.5Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Off-state Isolation-Nom |
75 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
13pF 85pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Time (Ton, Toff) (Max) |
20ns, 10ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-75dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
70ns |
Switch-off Time-Max |
25ns |
Voltage - Supply, Single (V+) |
2.7V~5.5V |
Length |
5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG738BRUZ-REEL7 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. 16 terminations have been made so far. The electronic part provides high-quality output because it has 8 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 16 series. The circuits in this analogue multiplexer number 1. Using the ADG738 search parameter, you can discover variants of the switch. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. Datasheets for 16 pin functions are available upon request. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. This multiplexer would work with 10μA current. This analogue multiplexer requires a voltage of 2.7V~5.5V when it drains from a single voltage supply. Integrated with an analog IC AUDIO/VIDEO SWITCH. Operating voltages range from 5V. 65MHz-bandwidths can be used to transfer data between multiplexers.
ADG738BRUZ-REEL7 Features
8 Channels
10μA Supply Current
Bandwidth: 65MHz
ADG738BRUZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG738BRUZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- Battery Powered Instruments
- Cable Modem
- Video signal routing
- USB 1.1 signal switching circuits
- Avionics test equipment
- T1/E1 Terminals
- Access Concentrators
- Modems
- Switching Systems