ADG739BRU-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG739 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 20ns, 10ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Signal Current-Max | 0.01A |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| RoHS Status | Non-RoHS Compliant |
ADG739BRU-REEL Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have the same number of circuits 4:1. Extended operating temperature around -40°C~85°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 4 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. A total of 16 pins are injected into the electrical part body. A SP4T switching circuit is used to build these analog multiplexers. The circuits in this analogue multiplexer number 2. Look for analog switch ic variants by searching with ADG739. Analog switches have 4.5Ohm internal resistance. Datasheets for 16 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. 2.7V is the lowest voltage the electrical component should receive. A voltage of 2.7V~5.5V is required for this switch device, which drains from a single voltage source. Integrated with AUDIO/VIDEO SWITCH analog IC. It is possible to operate 8 inputs.
ADG739BRU-REEL Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 100MHz
ADG739BRU-REEL Applications
There are a lot of Analog Devices Inc. ADG739BRU-REEL Analog Switches & Multiplexers ICs applications.
- FTTH
- SONET
- Digital access cross connects
- HDTV
- Voice over IP/DSL – Integrated Access Devices, Smart
- Automatic test equipment
- Fiber to the Home
- Data Acquisition Systems
- Mechanical reed relay replacement
- 65 V DACs
