ADG739BRUZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 100μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG739 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | AUDIO/VIDEO SWITCH |
| Power Dissipation | 100μW |
| Max Supply Current | 20μA |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| -3db Bandwidth | 100MHz |
| On-State Resistance (Max) | 4.5Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 20ns, 10ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -75dB @ 1MHz |
| Switch-on Time-Max | 70ns |
| Voltage - Supply, Single (V+) | 2.7V~5.5V |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG739BRUZ-REEL Overview
Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 4:1. Operation at a temperature around -40°C~85°C TA. Total terminations are 16. Due to its 4 channels, the electrical component produces high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. An electrical component of this type can be found in the 16 series. A SP4T switching circuit is used for these analog switches. This multiplexer is composed of 2 circuits. Try searching with ADG739 to find analog multiplexer variants. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. Datasheets for functions of 16 pins are available. Users should never supply a voltage higher than 5.5V to a switch device. 2.7V is the lowest voltage the electrical component should receive. Using a single voltage supply, this switch device consumes 2.7V~5.5V volts. If you put voltage higher than 20μA on the digital multiplexer, damage may occur. A AUDIO/VIDEO SWITCH analog IC is integrated into the board. In order to operate the 8 inputs, there are several steps to follow.
ADG739BRUZ-REEL Features
4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 100MHz
ADG739BRUZ-REEL Applications
There are a lot of Analog Devices Inc. ADG739BRUZ-REEL Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Audio and video routing
- Power routing
- MP3 players
- Avionics and Military Systems
- Optical Applications
- Communications systems
- High speed data transmission line cards
- Fiber to the Home
- Intelligent PBX
