ADG742BKSZ-R2

12ns, 8ns (Typ) SPST - NC 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG742 6 Pins 250pA 3V 6-TSSOP, SC-88, SOT-363

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG742BKSZ-R2
Package: 6-TSSOP, SC-88, SOT-363
Datasheet: PDF
Stock: 568
Description: 12ns, 8ns (Typ) SPST - NC 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG742 6 Pins 250pA 3V 6-TSSOP, SC-88, SOT-363(Kg)

Details

Tags

Parameters
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	18 ns
Supply Type	Single
Turn-Off Delay Time	12 ns
-3db Bandwidth	200MHz
On-State Resistance (Max)	3Ohm
High Level Output Current	30mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	55 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	17pF 17pF
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	12ns, 8ns (Typ)
Charge Injection	5pC
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	20ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	4Ohm
Normal Position	NC
Height	1mm
Length	2.2mm
Width	2.2mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	6-TSSOP, SC-88, SOT-363
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	no
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	3Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO OPERATE WITH 5 VOLT SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG742
Pin Count	6
Qualification Status	Not Qualified
Polarity	Non-Inverting
Power Supplies	3/5V
Number of Channels	1

ADG742BKSZ-R2 Overview

The electrical component comes in 6-TSSOP, SC-88, SOT-363 packaging, which makes it convenient to ship overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. 6 terminations have been made so far. A high-quality output is provided by the electrical component's 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. Circuits based on SPST - NC switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG742 if you are looking for variants. There is 3Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 6 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. The analog switch ic is of the Single supply type and is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5 VOLT SUPPLY. There is 4Ohm resistance between Drain and Source for this electronic part.