ADG742BKSZ5-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 3Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG742 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 12 ns |
| Number of Inputs | 1 |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 8 ns |
| On-State Resistance (Max) | 3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 55 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 17pF 17pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 12ns, 8ns (Typ) |
| Charge Injection | 5pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 20ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Normal Position | NC |
| Length | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG742BKSZ5-REEL7 Overview
The electrical component comes in 5-TSSOP, SC-70-5, SOT-353 packaging, which makes it convenient to ship overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Around -40°C~85°C TA is the extended operating temperature. A total of 5 terminations have been recorded. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. There is an electrical component included in the 5 series. The analog switch ics are built using SPST - NC switching circuits. Search with ADG742 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 3Ohm. Datasheets for 5 pin functions are available upon request. This switch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. 1.8V is the lowest voltage the electrical component should receive. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. Put voltage above 1μA on the multiplexer to cause damage. A 1 input needs to be operated. The transfer of data can be performed over 200MHz bandwidths.
ADG742BKSZ5-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 200MHz
ADG742BKSZ5-REEL7 Applications
There are a lot of Analog Devices Inc. ADG742BKSZ5-REEL7 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Voice over IP/DSL – Integrated Access Devices, Smart
- ISDN NT1/TA
- Fiber to the Home
- Transmit
- New designs requiring multiplexer functions
- HDTV
- E1 Multiplexer
- DSLAMs
- Audio signal routing
