ADG749BKSZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CAN ALSO OPERATE WITH 5 VOLT SUPPLY |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG749 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 7 ns |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 3 ns |
| On-State Resistance (Max) | 5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 87 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 7pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 7ns, 3ns (Typ) |
| Crosstalk | -82dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 8ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG749BKSZ-REEL Overview
Packed in 6-TSSOP, SC-88, SOT-363, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. The multiplexer is located in Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Operational temperature extended around -40°C~125°C TA. Totally, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. A total of 6 pins are injected into the body of the electronic part. Multiplexers built on a SPDT switching circuit are built. Try searching with ADG749 to find analog multiplexer variants. An switch multiplexer with 5Ohm internal resistance has a value of 5Ohm. You can find the functions of the 6 pins in the datasheets. Theswitch device is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. A low voltage of 1.8V should be applied to the electronic component. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. It may damage the digital multiplexer if the voltage is higher than 1μA. 200MHz bandwidths enable data to be transferred. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE WITH 5 VOLT SUPPLY. An output of 2 is provided by the digital multiplexer.
ADG749BKSZ-REEL Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE WITH 5 VOLT SUPPLY
ADG749BKSZ-REEL Applications
There are a lot of Analog Devices Inc. ADG749BKSZ-REEL Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Sample hold systems
- Medical
- PBX interfaces
- Transmit
- PDH Multiplexers
- DVD-R
- Audio signal routing
- Remote Powered Equipment
- Private Branch Exchange (PBX)
