ADG758BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Additional Feature | CAN ALSO OPERATE AT 5V NOMINAL |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG758 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Interface | Parallel |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Turn On Delay Time | 14 ns |
| Logic Function | Multiplexer |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Supply Type | Dual, Single |
| Bandwidth | 55MHz |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 85pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 25ns |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 0.9mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG758BCPZ-REEL7 Overview
As the electronic part is packed in 20-WFQFN Exposed Pad, CSP, international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. There is 8:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, there have been 20 terminations. High-quality output is provided by the electronic component's 8 channels. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. The electronic part body is injected with 20 pins. A total of 1 circuits make up this switch device. Look for analog switch ic variants by searching with ADG758. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. You can find the functions of the 20 pins in the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. An effective Dual, Single supply digital multiplexer. 1.8V is the lowest voltage the electrical component should receive. This digital switch can be operated with a current of 1nA. A voltage of 5V can be used to operate the electronic component. It is possible to transfer data over a 55MHz-bandwidth. This electronic part has additional features, such as: CAN ALSO OPERATE AT 5V NOMINAL.
ADG758BCPZ-REEL7 Features
8 Channels
1nA Supply Current
Bandwidth: 55MHz
Additional Features: CAN ALSO OPERATE AT 5V NOMINAL
ADG758BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG758BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Communication systems
- Audio signal routing
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Cross Connects
- Wireless Local Loop
- Avionics test equipment
- Public switching systems
- Access Concentrators
- 65 V DACs
- Frame Relay Equipment
