ADG759BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 4.5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG759 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 4 |
| Interface | Parallel |
| Number of Circuits | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Nominal Supply Current | 1nA |
| Power Dissipation | 5μW |
| Throw Configuration | 4PST |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±2.5V |
| Bandwidth | 55MHz |
| Supply Current-Max (Isup) | 0.001mA |
| Neg Supply Voltage-Nom (Vsup) | -2.5V |
| Turn-Off Delay Time | 7 ns |
| On-State Resistance (Max) | 4.5Ohm |
| High Level Output Current | 30mA |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 13pF 42pF |
| On-state Resistance Match-Nom | 0.4Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 14ns, 8ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 15ns |
| Signal Current-Max | 0.03A |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG759BCPZ Overview
Shipping overseas is convenient due to the electrical component's packing in 20-WFQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tray is used. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around -40°C~85°C TA. A total of 20 terminations have been recorded. By its 4 channels, the electronic component provides high-quality output. If the voltage supply is 2.5V volts, the electrical component should be turned on and run. As part of its design, the 20 series is equipped with this electronic component. Unlike digital switches, these are based on SP4T switching circuits. It consists of 2 circuits. Using the ADG759 search parameter, you can discover variants of the switch. Analog switches have 4.5Ohm internal resistance. Datasheets for 20 pin functions are available upon request. The analog multiplexer shown here is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. 1.8V is the lowest voltage the electrical component should receive. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. A voltage of 5V can be used to operate the electronic component. It is possible to operate 8 inputs. There are various bandwidths available for data transfer.
ADG759BCPZ Features
4 Channels
Switch Circuit: SP4T
Bandwidth: 55MHz
ADG759BCPZ Applications
There are a lot of Analog Devices Inc. ADG759BCPZ Analog Switches & Multiplexers ICs applications.
- Cable PC
- Central office
- Medical systems
- DSUs
- Video switching
- MP3 players
- Avionics and Military Systems
- Public switching systems
- Medical
- Cable Telephony – NIU, Set-Top Box, Home Side Box
