Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
20-WFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Resistance |
4.5Ohm |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG759 |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
2 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Throw Configuration |
4PST |
Logic Function |
Multiplexer |
Number of Inputs |
8 |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V ±2.5V |
Supply Type |
Dual, Single |
Bandwidth |
55MHz |
Supply Current-Max (Isup) |
0.001mA |
Neg Supply Voltage-Nom (Vsup) |
-2.5V |
Turn-Off Delay Time |
7 ns |
On-State Resistance (Max) |
4.5Ohm |
High Level Output Current |
30mA |
Dual Supply Voltage |
2.5V |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
80 dB |
Current - Leakage (IS(off)) (Max) |
100pA |
Channel Capacitance (CS(off), CD(off)) |
13pF 42pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
14ns, 8ns (Typ) |
Charge Injection |
3pC |
Crosstalk |
-80dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
15ns |
Signal Current-Max |
0.03A |
Height Seated (Max) |
0.9mm |
Length |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG759BCPZ-REEL7 Overview
Shipping overseas is convenient due to the electrical component's packing in 20-WFQFN Exposed Pad, CSP. High reliability is achieved by using advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 4:1 is the ratio of multiplexer to demultiplexer circuits. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 20. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. The electronic part body is injected with 20 pins. These analog multiplexers are built based on SP4T switching circuits. A total of 2 circuits make up this switch device. Try searching for ADG759 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 4.5Ohm. To find out what the 20 pins do, please refer to the datasheets. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 1.8V is the lowest voltage that should be fed to the electronic electronic part. This multiplexer would work with 1nA current. 5V operating voltages can be used with this electrical part. Among the inputs that can be operated are the 8 inputs. 55MHz bandwidths enable data to be transferred.
ADG759BCPZ-REEL7 Features
4 Channels
Switch Circuit: SP4T
1nA Supply Current
Bandwidth: 55MHz
ADG759BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG759BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- SDH/SONET multiplexers
- Audio and video switching
- E1 Multiplexer
- Automatic test equipment
- PBXs
- PDH Multiplexers
- Relay replacements
- Communication systems
- Cable PC
- Relay Replacement