ADG774ABRQZ-REEL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 3.5Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG774 |
| Pin Count | 16 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 0V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | DPST |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 400MHz |
| On-State Resistance (Max) | 3.5Ohm |
| High Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 7.5pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 12ns, 6ns |
| Charge Injection | 6pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -70dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 3V~5V |
| Height Seated (Max) | 1.7526mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG774ABRQZ-REEL Overview
The electrical component comes in 16-SSOP (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. High-quality output is provided by the electronic component's 2 channels. With a 3V voltage supply, the electrical component should be turned on and run. Into the electrical component body are injected 16 pins. Based on SPDT switching circuits, these analog multiplexers work. 4 circuits are used in this analogue multiplexer. Using the ADG774 search parameter, you can discover variants of the switch. It has an internal resistance of 3.5Ohm. The datasheets for the 16 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. Analogue multiplexers of the Single supply type that are cost-effective. 0V should be the lowest voltage fed to the electronic component. This digital switch can be operated with a current of 1nA. A voltage of 3V~5V is required to drain this analog switch from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. There are 8 inputs to be operated. 400MHz bandwidths enable data to be transferred.
ADG774ABRQZ-REEL Features
2 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 400MHz
ADG774ABRQZ-REEL Applications
There are a lot of Analog Devices Inc. ADG774ABRQZ-REEL Analog Switches & Multiplexers ICs applications.
- MP3 players
- Fault Tolerant Systems
- Relay replacements
- Ultrasound
- Remote Powered Equipment
- DSLAMs
- Sample-and-hold systems
- Cable Modem
- Microwave transmission systems
- Remote wireless modules
