ADG774BRQ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Additional Feature | ALSO OPERATE AT 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG774 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 566mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Supply Current-Max (Isup) | 0.001mA |
| -3db Bandwidth | 240MHz |
| On-State Resistance (Max) | 2.2Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 8ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -75dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 21ns |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 3V~5V |
| Signal Current-Max | 0.1A |
| Height Seated (Max) | 1.7526mm |
| RoHS Status | Non-RoHS Compliant |
ADG774BRQ Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. A total of 16 terminations have been recorded. A 2 channel electronic part produces high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. There are 16 pins injected into the electronic part body. The analog switch ics are built using SPDT switching circuits. 4 circuits are used in this analogue multiplexer. Try searching with ADG774 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 2.2Ohm. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. The voltage required by this switch device is 3V~5V, draining from a single voltage supply. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. There are 8 inputs to be operated. Don't forget the additional features of this electronic part, such as: ALSO OPERATE AT 5V SUPPLY.
ADG774BRQ Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 240MHz
Additional Features: ALSO OPERATE AT 5V SUPPLY
ADG774BRQ Applications
There are a lot of Analog Devices Inc. ADG774BRQ Analog Switches & Multiplexers ICs applications.
- CSU
- Cell phones
- E1 Multiplexer
- 65 V DACs
- Fiber to the Home
- Microprocessor controlled systems
- Automatic test equipment
- FTTH
- Audio signal routing
- High-Voltage
