ADG774BRQ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Additional Feature | ALSO OPERATE AT 5V SUPPLY |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADG774 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Number of Circuits | 4 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 566mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Supply Current-Max (Isup) | 0.001mA |
| -3db Bandwidth | 240MHz |
| On-State Resistance (Max) | 2.2Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 8ns |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -75dB @ 10MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 21ns |
| Switch-off Time-Max | 11ns |
| Voltage - Supply, Single (V+) | 3V~5V |
| Signal Current-Max | 0.1A |
| Height Seated (Max) | 1.7526mm |
| RoHS Status | Non-RoHS Compliant |
ADG774BRQ-REEL Overview
As the electronic part is packed in 16-SSOP (0.154, 3.90mm Width), international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Operating temperature extended to -40°C~125°C TA. A total of 16 terminations have been recorded. A 2 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. These analog multiplexers are built based on SPDT switching circuits. A total of 4 circuits make up this switch device. Try searching for the analog switch ic with ADG774 if you are looking for variants. As far as internal resistance is concerned, it has 2.2Ohm. Datasheets for functions of 16 pins are available. It is a typical Multiplexer or Switches analog multiplexer. A voltage of 3V~5V is required for this switch device, which drains from a single voltage source. It is integrated with SINGLE-ENDED MULTIPLEXER analog ICs. Operating 8 inputs is required. Additional features include: ALSO OPERATE AT 5V SUPPLY.
ADG774BRQ-REEL Features
2 Channels
Switch Circuit: SPDT
-3db Bandwidth: 240MHz
Additional Features: ALSO OPERATE AT 5V SUPPLY
ADG774BRQ-REEL Applications
There are a lot of Analog Devices Inc. ADG774BRQ-REEL Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Isolation
- Remote wireless modules
- Multi-Line E1 Interface Cards
- Avionics test equipment
- High reliability control systems
- Imaging
- Channel Banks
- RGB switches
- Cable Telephony – NIU, Set-Top Box, Home Side Box
