ADG782BCPZ
| Parameters | |
|---|---|
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG782 |
| Pin Count | 20 |
| Number of Channels | 1 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1μA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Turn On Delay Time | 11 ns |
| Number of Inputs | 4 |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 58 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 11ns, 6ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 10MHz |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height | 750μm |
| Length | 4.1mm |
| Width | 4.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
ADG782BCPZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. High reliability is achieved by using advanced packaging method Tray. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature extended to -40°C~85°C TA. Total terminations are 20. As a result of its 1 channels, this electronic component provides high-quality output. A 3V voltage supply should turn on and run the electronic component. There are 20 pins injected into the electronic part body. Multiplexers built on a SPST - NO switching circuit are built. Try searching with ADG782 to find analog multiplexer variants. In this multiplexer, the internal resistance is 4Ohm. You can find the functions of the 20 pins in the datasheets. normally, users should not supply switches with voltages higher than 5.5V. The lowest voltage fed to the electronic component should be 1.8V. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. In order to operate the 4 inputs, there are several steps to follow. The data can be transferred over a wide range of bandwidths, called 200MHz bandwidths.
ADG782BCPZ Features
1 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
ADG782BCPZ Applications
There are a lot of Analog Devices Inc. ADG782BCPZ Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Cable PC
- Avionics test equipment
- Fiber In The Loop (FITL)
- Communication systems
- SONET
- USB 1.1 signal switching circuits
- RGB switches
- Cable Modem
- Battery Powered Systems
