ADG783BCPZ-REEL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 5V NOMINAL |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG783 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 11 ns |
| Turn-Off Delay Time | 6 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 78 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 11ns, 6ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 10MHz |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG783BCPZ-REEL Overview
Packed in 20-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 20. As a result of its 4 channels, this electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. A key feature of the 20 series is the inclusion of this electronic part as part of its design. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Use ADG783 to search for variants of the digital switches. It has an internal resistance of 4Ohm. The functions of 20 pins can be found in the datasheets. Users should never supply a voltage higher than 5.5V to a switch device. It is recommended to use 1.8V as the lowest voltage for the electrical part. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. Additional features of the electronic component include: CAN ALSO OPERATE AT 5V NOMINAL.
ADG783BCPZ-REEL Features
4 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE AT 5V NOMINAL
ADG783BCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG783BCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- High-Voltage
- E1 Network Equipment
- Relay Replacement
- Audio/video switches
- SONET/SDH ADM
- Fault Tolerant Systems
- Communication systems
- Access Concentrators
- Avionics and Military Systems
