ADG783BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 5V NOMINAL |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG783 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Number of Channels | 4 |
| Interface | Parallel |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 11 ns |
| Supply Type | Single |
| Bandwidth | 200MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 4Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 78 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 0.1Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 11ns, 6ns (Typ) |
| Charge Injection | 3pC |
| Crosstalk | -90dB @ 10MHz |
| Switch-off Time-Max | 12ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG783BCPZ-REEL7 Overview
The electronic component is convenient to ship overseas because it is packed in a 20-WFQFN Exposed Pad, CSP. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~85°C TA. A total of 20 terminations have been recorded. A high-quality output is provided by the electrical component's 4 channels. A 3V voltage supply should turn on and run the electronic component. It is part of the design of the 20 series that this electronic component is included. These analog multiplexers are built based on SPST - NO/NC switching circuits. Look for analog switch ic variants by searching with ADG783. An switch multiplexer with 4Ohm internal resistance has a value of 4Ohm. Datasheets for 20 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 1.8V. In order to operate this switch device, it would need a current of 1nA. Analogue multiplexers require a 1.8V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. This switch operates within the bandwidth of 200MHz. This electrical component also includes additional features such as CAN ALSO OPERATE AT 5V NOMINAL.
ADG783BCPZ-REEL7 Features
4 Channels
Switch Circuit: SPST - NO/NC
1nA Supply Current
Bandwidth: 200MHz
Additional Features: CAN ALSO OPERATE AT 5V NOMINAL
ADG783BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG783BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- SDH
- SDH/SONET multiplexers
- Industrial control systems
- Wireless Local Loop
- Communication systems
- Sample-and-hold systems
- USB 1.1 signal switching circuits
- Cable PC
- New designs requiring multiplexer functions
- Low-Voltage
