ADG784BCPZ
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Additional Feature | ALSO OPERATES AT 5V SUPPLY |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG784 |
| Pin Count | 20 |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Max Supply Voltage | 5V |
| Min Supply Voltage | 3.3V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Data Rate | 16 Mbps |
| Number of Inputs | 8 |
| Bandwidth | 240MHz |
| Turn-Off Delay Time | 4 ns |
| On-State Resistance (Max) | 2.2Ohm Typ |
| High Level Output Current | 100mA |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -75dB @ 10MHz |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 10ns |
| Voltage - Supply, Single (V+) | 3.3V 5V |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG784BCPZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. High reliability is ensured by the advanced packaging method Tray. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. Totally, there are 20 terminations. A electrical component with 2 channels is capable of high-quality output. If the voltage supply is 3V volts, the electrical component should be turned on and run. Into the electrical component body are injected 20 pins. A SPDT switching circuit is used for these analog switches. There are 4 circuits in this multiplexer. Try searching with ADG784 to find analog multiplexer variants. An switch multiplexer with 2.2Ohm internal resistance has a value of 2.2Ohm. The functions of 20 pins can be found in the datasheets. Users should never supply a voltage higher than 5V to a switch device. 3.3V is the lowest voltage that should be fed to the electronic electronic part. Analogue multiplexers require a 3.3V 5V voltage to drain from a single voltage supply. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating 8 inputs is required. There are various bandwidths available for data transfer. This electronic part has additional features, such as: ALSO OPERATES AT 5V SUPPLY.
ADG784BCPZ Features
2 Channels
Switch Circuit: SPDT
Bandwidth: 240MHz
Additional Features: ALSO OPERATES AT 5V SUPPLY
ADG784BCPZ Applications
There are a lot of Analog Devices Inc. ADG784BCPZ Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- New designs requiring multiplexer functions
- PBXs
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Medical systems
- High speed data transmission line cards
- SDH
- Data Acquisition Systems
- Imaging
- Remote wireless modules
