ADG784BCPZ-REEL7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 2.2Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CAN ALSO OPERATE AT 5V NOMINAL |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADG784 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 3.3V |
| Number of Channels | 2 |
| Interface | Parallel |
| Number of Circuits | 4 |
| Operating Supply Current | 1nA |
| Power Dissipation | 5μW |
| Throw Configuration | DPST |
| Logic Function | Demultiplexer, Multiplexer |
| Data Rate | 16 Mbps |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 240MHz |
| Turn-Off Delay Time | 4 ns |
| On-State Resistance (Max) | 2.2Ohm Typ |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 65 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 20pF |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switch Circuit | SPDT |
| Charge Injection | 10pC |
| Channel-to-Channel Matching (ΔRon) | 150m Ω |
| Crosstalk | -75dB @ 10MHz |
| Switch-on Time-Max | 25ns |
| Switch-off Time-Max | 10ns |
| Voltage - Supply, Single (V+) | 3.3V 5V |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADG784BCPZ-REEL7 Overview
Packed in 20-WFQFN Exposed Pad, CSP, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. It is mounted in the position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~85°C TA. There are 20 terminations totally. The electronic part provides high-quality output because it has 2 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 20 pins. Multiplexers built on a SPDT switching circuit are built. This multiplexer is composed of 4 circuits. Using the ADG784 search parameter, you can discover variants of the switch. An switch multiplexer with 2.2Ohm internal resistance has a value of 2.2Ohm. To find out what the functions of 20 pins are, please refer to their datasheets. Analogue multiplexers of the Single supply type that are cost-effective. The analogue multiplexer could operate on 1nA current. Using only a single voltage supply, this analog switch requires 3.3V 5V voltage. Operating voltages range from 5V. The 8 inputs need to be operated in order to work. The data can be transferred over a wide range of bandwidths, called 240MHz bandwidths. You shouldn't miss the additional features of the electrical component, such as: CAN ALSO OPERATE AT 5V NOMINAL.
ADG784BCPZ-REEL7 Features
2 Channels
Switch Circuit: SPDT
1nA Supply Current
Bandwidth: 240MHz
Additional Features: CAN ALSO OPERATE AT 5V NOMINAL
ADG784BCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG784BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- HDTV
- High-Voltage
- Video switching
- PBXs
- Switching Systems
- Audio and video signal routing
- DSUs
- Precision instrumentation
- Channel Banks
- Wireless Local Loop
