ADG786BCPZ

21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG786 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG786BCPZ
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 273
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG786 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tray
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG786
Pin Count	20
Number of Outputs	6
Number of Channels	3
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Test Frequency	1MHz
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Drain to Source Resistance	4.5Ohm
Height	830μm
Length	4mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG786BCPZ Overview

Presented in 20-WFQFN Exposed Pad, CSP, this electrical component is convenient for overseas shipping. High reliability is achieved by using advanced packaging method Tray. It is mounted in the position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. A total of 20 terminations have been recorded. A electrical component with 3 channels is capable of high-quality output. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 20 pins. Based on SPDT switching circuits, these analog multiplexers work. Using the ADG786 search parameter, you can discover variants of the switch. There is 4.5Ohm internal resistance in this digital multiplexer. Datasheets for 20 pin functions are available upon request. Multiplexer or Switches is a typical switch device. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Dual, Single supply type. 1.8V should be the lowest voltage fed to the electronic component. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 2.75V. With dual power supplies, you should attach at least 2.25V. A 160MHz-bandwidth can be used for data transfer. A Drain to Source resistance of 4.5Ohm is shown for this electronic part. This digital multiplexer has 6 outputs.