Parameters |
Turn On Delay Time |
13 ns |
Number of Inputs |
2 |
Bandwidth |
145MHz |
Turn-Off Delay Time |
3 ns |
On-State Resistance (Max) |
3Ohm |
High Level Output Current |
100mA |
Multiplexer/Demultiplexer Circuit |
2:1 |
Off-state Isolation-Nom |
63 dB |
Current - Leakage (IS(off)) (Max) |
50pA Typ |
Channel Capacitance (CS(off), CD(off)) |
16pF |
On-state Resistance Match-Nom |
0.07Ohm |
Switch Circuit |
SPDT |
Switch Time (Ton, Toff) (Max) |
19ns, 5ns |
Insertion Loss (dB) |
0.2 dB |
Charge Injection |
14pC |
Channel-to-Channel Matching (ΔRon) |
20m Ω |
Crosstalk |
-110dB @ 1MHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
30ns |
Switch-off Time-Max |
6ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Drain to Source Resistance |
6Ohm |
Normal Position |
NO/NC |
Height |
750μm |
Length |
3mm |
Width |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
3Ohm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5.5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG787 |
Pin Count |
10 |
Number of Outputs |
4 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5.5V |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Test Frequency |
1MHz |
Power Dissipation |
5.5μW |
Max Supply Current |
1μA |
ADG787BCPZ-500RL7 Overview
As the electronic part is packed in 10-VFDFN Exposed Pad, CSP, international shipping is convenient. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 10. This electronic part offers high-quality output due to its 1 channels. When a voltage supply of 2.7V is used, the electronic component should be turned on and run. An electrical component like this is included in the 10 series. The analog switch ics are built using SPDT switching circuits. Try searching with ADG787 to find analog multiplexer variants. A 3Ohm internal resistance characterizes this multiplexer. You can find the functions of the 10 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. 1.8V should be the lowest voltage fed to the electronic component. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A voltage higher than 1μA may cause damage to the switch multiplexer. Operating voltages range from 5.5V. A 2 input needs to be operated. In 145MHz-bandwidths, data can be transferred. This electronic component presents a Drain to Source resistance of 6Ohm. This digital multiplexer has 4 outputs.
ADG787BCPZ-500RL7 Features
1 Channels
Switch Circuit: SPDT
Bandwidth: 145MHz
Drain-to-Source resistance: 6Ohm
ADG787BCPZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG787BCPZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Modems
- Audio and video switching
- Digital cross connects (DSX-1)
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Remote Powered Equipment
- Audio signal routing
- Remote wireless modules
- Wireless Local Loop
- Cell phones
- Cable Telephony – NIU, Set-Top Box, Home Side Box