ADG787BRMZ

19ns, 5ns SPDT 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG787 10 Pins 50pA Typ 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG787BRMZ
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: PDF
Stock: 640
Description: 19ns, 5ns SPDT 3Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG787 10 Pins 50pA Typ 2.7V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)(Kg)

Inquiry Now

Details

Tags

Parameters
Min Supply Voltage	1.8V
Test Frequency	1MHz
Nominal Supply Current	1μA
Power Dissipation	5.5μW
Max Supply Current	1μA
Turn On Delay Time	13 ns
Bandwidth	145MHz
Turn-Off Delay Time	3 ns
On-State Resistance (Max)	3Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	63 dB
Current - Leakage (IS(off)) (Max)	50pA Typ
Channel Capacitance (CS(off), CD(off))	16pF
On-state Resistance Match-Nom	0.07Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	19ns, 5ns
Insertion Loss (dB)	0.2 dB
Charge Injection	14pC
Channel-to-Channel Matching (ΔRon)	20m Ω
Crosstalk	-110dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	30ns
Switch-off Time-Max	6ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	2.5Ohm
Height	850μm
Length	3mm
Width	3mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 1 month ago)
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	3Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.5μW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG787
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	5.5V
Power Supplies	3/5V
Number of Channels	2
Interface	Parallel
Max Supply Voltage	5.5V

ADG787BRMZ Overview

Shipping overseas is convenient due to the electrical component's packing in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 2 channels. It is safe to turn on and run the electronic component with a 2.7V voltage supply. Into the electrical component body are injected 10 pins. Unlike digital switches, these are based on SPDT switching circuits. Try searching for the analog switch ic with ADG787 if you are looking for variants. It has an internal resistance of 3Ohm. For functions related to 10 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 5.5V should not normally be supplied to the switches. The lowest voltage fed to the electronic component should be 1.8V. Using a single voltage supply, this switch device consumes 1.8V~5.5V volts. The analogue multiplexer may be damaged if voltage is greater than 1μA. 5.5V operating voltages are supported by the electronic component. The transfer of data can be performed over 145MHz bandwidths. Resistivity from Drain to Source is 2.5Ohm for this electronic part. A analog switch ics with 4 outputs is included.