ADG788BCPZ

21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG788 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG788BCPZ
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 315
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG788 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 3 months ago)
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tray
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG788
Pin Count	20
Number of Outputs	8
Power Supplies	+-2.5/3/5V
Number of Channels	1
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Nominal Supply Current	1μA
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	35ns
Switch-off Time-Max	16ns
Drain to Source Resistance	2.5mOhm
Height	830μm
Length	4mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG788BCPZ Overview

As the electronic part is packed in 20-WFQFN Exposed Pad, CSP, international shipping is convenient. In order to provide high reliability, an advanced packaging method Tray is used. In Surface Mount, you'll find this switch device. 2:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. In total, there are 20 terminations. As a result of its 1 channels, this electronic component provides high-quality output. When a voltage supply of 2.5V is used, the electronic component should be turned on and run. As part of the design of the 20 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for ADG788 variants of the analog switch ic. This digital multiplexer has 4.5Ohm internal resistance. Datasheets for 20 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 5.5V voltage to the switch device. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.8V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 2.75V. For dual power supplies, a voltage of at least 2.25V should be attached. Operating 4 inputs is required. In 160MHz-bandwidths, data can be transferred. There is 2.5mOhm resistance between Drain and Source for this electronic part. In this digital multiplexer, there are 8 outputs.