ADG788BCPZ-REEL

21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG788 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG788BCPZ-REEL
Package: 20-WFQFN Exposed Pad, CSP
Datasheet: PDF
Stock: 698
Description: 21ns, 10ns (Typ) SPDT 4.5Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG788 20 Pins 100pA 2.5V 20-WFQFN Exposed Pad, CSP(Kg)

Details

Tags

Parameters
Interface	Parallel
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Power Dissipation	5μW
Max Supply Current	1μA
Turn On Delay Time	34 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	1.8V~5.5V ±2.5V
Supply Type	Dual, Single
Bandwidth	160MHz
Neg Supply Voltage-Nom (Vsup)	-2.5V
Turn-Off Delay Time	12 ns
Max Dual Supply Voltage	2.75V
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	11pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	21ns, 10ns (Typ)
Charge Injection	5pC
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	35ns
Switch-off Time-Max	16ns
Height Seated (Max)	0.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 4 weeks ago)
Mounting Type	Surface Mount
Package / Case	20-WFQFN Exposed Pad, CSP
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
ECCN Code	EAR99
Resistance	4.5Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	CAN ALSO OPERATE AT 5V NOMINAL
Subcategory	Multiplexer or Switches
Max Power Dissipation	5μW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	NO LEAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG788
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Power Supplies	+-2.5/3/5V
Number of Channels	1

ADG788BCPZ-REEL Overview

The electronic part can be shipped overseas conveniently because it is packaged in 20-WFQFN Exposed Pad, CSP. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Operational temperature extended around -40°C~85°C TA. Totally, there are 20 terminations. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 2.5V volts, the electrical part can be powered up and run. The electronic part body is injected with 20 pins. The analog switch ics are built using SPDT switching circuits. Use ADG788 to search for variants of the digital switches. As far as internal resistance is concerned, it has 4.5Ohm. Please refer to the datasheets for 20 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. Digital switch that provides Dual, Single power at a cost-effective price. There should be 1.8V voltage fed to the electrical part below 1.8V. A voltage higher than 1μA may cause damage to the switch multiplexer. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 2.75V. If you are using a dual power supply, you should attach at least 2.25V. It is possible to operate 4 inputs. The transfer of data can be performed over 160MHz bandwidths. There is also CAN ALSO OPERATE AT 5V NOMINAL to look out for in this electronic part. There are 8 outputs on the analogue multiplexer.