ADG794BRQZ

7ns, 5ns (Typ) SPDT 7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG794 16 Pins 1pA Typ 3V 16-SSOP (0.154, 3.90mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG794BRQZ
Package: 16-SSOP (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 734
Description: 7ns, 5ns (Typ) SPDT 7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG794 16 Pins 1pA Typ 3V 16-SSOP (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Mounting Type	Surface Mount
Package / Case	16-SSOP (0.154, 3.90mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	7Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	566mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG794
Pin Count	16
Number of Channels	2
Interface	Parallel
Number of Circuits	4
Max Supply Voltage	5V
Min Supply Voltage	3.3V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Operating Supply Current	1nA
Power Dissipation	5μW
Max Supply Current	1μA
Throw Configuration	DPST
Turn On Delay Time	10 ns
Number of Inputs	8
Bandwidth	300MHz
Turn-Off Delay Time	6 ns
On-State Resistance (Max)	7Ohm
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	1pA Typ
Channel Capacitance (CS(off), CD(off))	8pF 14pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	7ns, 5ns (Typ)
Charge Injection	7.5pC
Channel-to-Channel Matching (ΔRon)	400m Ω
Crosstalk	-70dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3.3V 5V
Drain to Source Resistance	5Ohm
Height	1.65mm
Length	5mm
Width	3.91mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG794BRQZ Overview

Presented in 16-SSOP (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 2:1. Operating temperature around -40°C~85°C TA extended. A total of 16 terminations have been recorded. This electronic part offers high-quality output due to its 2 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Try searching with ADG794 to find analog multiplexer variants. A 7Ohm internal resistance characterizes this multiplexer. You can find the functions of the 16 pins in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users should never supply a voltage higher than 5V to a switch device. There should be 3.3V voltage fed to the electrical part below 3.3V. This multiplexer would work with 1nA current. A voltage of 3.3V 5V is required for this switch device, which drains from a single voltage source. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. With a AUDIO/VIDEO SWITCH analog IC integrated into the board. The 8 inputs need to be operated in order to work. The transfer of data can be performed over 300MHz bandwidths. A Drain to Source resistance of 5Ohm is shown for this electronic part.