ADG795ABCPZ-REEL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad, CSP |
| Surface Mount | YES |
| Number of Pins | 24 |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 4Ohm |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 5 |
| Supply Voltage | 3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADG795A |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 2 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Number of Bits | 5 |
| Throw Configuration | SPDT |
| Supply Current-Max (Isup) | 0.7mA |
| -3db Bandwidth | 325MHz |
| Off-state Isolation-Nom | 60 dB |
| On-state Resistance Match-Nom | 0.15Ohm |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 270ns |
| Switch-off Time-Max | 260ns |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADG795ABCPZ-REEL Overview
Due to its 24-VFQFN Exposed Pad, CSP packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Cut Tape (CT). There is an analog multiplexer mounted in position Surface Mount. There are 24 terminations totally. By its 2 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. An injection of 24 pins is performed into the body of the electrical component. Try searching for ADG795A variants of the analog switch ic. It has an internal resistance of 4Ohm. To find out what the functions of 24 pins are, please refer to their datasheets. This switch device is a typical Multiplexer or Switches. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. Temperatures above 85°C should not be used to operate the switches. It can conduct 5-bit signals. Providing the analog switch ic with electricity requires a minimum voltage of 2.7V.
ADG795ABCPZ-REEL Features
2 Channels
-3db Bandwidth: 325MHz
5-Bit
ADG795ABCPZ-REEL Applications
There are a lot of Analog Devices Inc. ADG795ABCPZ-REEL Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- DSUs
- Audio/video switches
- RGB switches
- Battery Powered Instruments
- Fiber to the Home
- Digital access cross connects
- Routers
- Audio signal routing
