Parameters |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
300mOhm |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG801 |
Pin Count |
8 |
Power Supplies |
2/5V |
Number of Channels |
1 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
45 ns |
Supply Type |
Single |
Turn-Off Delay Time |
15 ns |
-3db Bandwidth |
12MHz |
On-State Resistance (Max) |
300mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
61 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
180pF 180pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
45ns, 15ns |
Charge Injection |
50pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
55ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Normal Position |
NO |
Length |
3mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
ADG801BRM-REEL Overview
Presented in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 8 terminations. This electronic part offers high-quality output due to its 1 channels. Powered by a 3V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 8 series. Multiplexers built on a SPST - NO switching circuit are built. ADG801 can be used to search for analog multiplexer variants. An switch multiplexer with 300mOhm internal resistance has a value of 300mOhm. Datasheets for functions of 8 pins are available. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. 1.8V is the lowest voltage the electrical component should receive. An analogue multiplexer drains from a single voltage supply at 1.8V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1μA.
ADG801BRM-REEL Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 12MHz
ADG801BRM-REEL Applications
There are a lot of Analog Devices Inc. ADG801BRM-REEL Analog Switches & Multiplexers ICs applications.
- Cell phones
- Remote wireless modules
- CSU
- Cable Modem
- E1 Multiplexer
- Private Branch Exchange (PBX)
- Audio and video switching
- E1 Network Equipment
- ATM
- Battery Powered Systems