Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 1 month ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
300mOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
5μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.95mm |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
ADG801 |
Pin Count |
6 |
Polarity |
Non-Inverting |
Power Supplies |
3/5V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
1.8V |
Operating Supply Current |
1nA |
Nominal Supply Current |
1μA |
Power Dissipation |
5μW |
Max Supply Current |
1μA |
Throw Configuration |
SPST |
Turn On Delay Time |
45 ns |
Supply Type |
Single |
Bandwidth |
12MHz |
Turn-Off Delay Time |
15 ns |
On-State Resistance (Max) |
300mOhm |
High Level Output Current |
400mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
61 dB |
Current - Leakage (IS(off)) (Max) |
250pA |
Channel Capacitance (CS(off), CD(off)) |
180pF 180pF |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
45ns, 15ns |
Charge Injection |
50pC |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
55ns |
Voltage - Supply, Single (V+) |
1.8V~5.5V |
Drain to Source Resistance |
300mOhm |
Normal Position |
NO |
Height |
1.3mm |
Length |
3mm |
Width |
1.7mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG801BRTZ-500RL7 Overview
As the electronic part is packed in SOT-23-6, international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operational temperature extended around -40°C~125°C TA. In total, 6 terminations have occurred. This electronic part offers high-quality output due to its 1 channels. It is safe to turn on and run the electronic component with a 3V voltage supply. This electronic part can be found in the 6 series. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Use ADG801 to search for variants of the digital switches. In this multiplexer, the internal resistance is 300mOhm. Please refer to the datasheets for 6 pins functions. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage fed to the electronic component should be 1.8V. For this multiplexer to operate, 1nA current would be sufficient. This analogue multiplexer requires a voltage of 1.8V~5.5V when it drains from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. There are various bandwidths available for data transfer. Resistivity from Drain to Source is 300mOhm for this electronic part.
ADG801BRTZ-500RL7 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
Bandwidth: 12MHz
Drain-to-Source resistance: 300mOhm
ADG801BRTZ-500RL7 Applications
There are a lot of Analog Devices Inc. ADG801BRTZ-500RL7 Analog Switches & Multiplexers ICs applications.
- Transmit
- Avionics
- Channelized and Unchannelized DS3 applications
- Audio/video switches
- USB 1.1 signal switching circuits
- Digital Cross-Connects
- Audio and video routing
- PDAs
- Battery-powered systems
- Fiber In The Loop (FITL)