ADG802BRT-500RL7
| Parameters | |
|---|---|
| Charge Injection | 50pC |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 55ns |
| Voltage - Supply, Single (V+) | 1.8V~5.5V |
| Max Junction Temperature (Tj) | 150°C |
| Normal Position | NC |
| On-State Resistance | 250mOhm |
| Height | 1.45mm |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 300mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 5μW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Base Part Number | ADG802 |
| Pin Count | 6 |
| Power Supplies | 3/5V |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.8V |
| Nominal Supply Current | 1nA |
| Power Dissipation | 5μW |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 45 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 15 ns |
| -3db Bandwidth | 12MHz |
| On-State Resistance (Max) | 300mOhm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 61 dB |
| Current - Leakage (IS(off)) (Max) | 250pA |
| Channel Capacitance (CS(off), CD(off)) | 180pF 180pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 45ns, 15ns |
ADG802BRT-500RL7 Overview
The electronic part can be shipped overseas conveniently because it is packaged in SOT-23-6. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature extended to -40°C~125°C TA. In total, there have been 6 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. A key feature of the 6 series is the inclusion of this electronic part as part of its design. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for ADG802 variants of the analog switch ic. A 300mOhm internal resistance characterizes this multiplexer. The functions of 6 pins can be found in the datasheets. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. 1.8V should be the lowest voltage fed to the electronic component. A voltage of 1.8V~5.5V is required for this switch device, which drains from a single voltage source. If you put voltage higher than 1μA on the digital multiplexer, damage may occur.
ADG802BRT-500RL7 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 12MHz
ADG802BRT-500RL7 Applications
There are a lot of Analog Devices Inc. ADG802BRT-500RL7 Analog Switches & Multiplexers ICs applications.
- Cable Modem
- ATM
- Avionics and Military Systems
- E1 Multiplexer
- Video switching
- SDH/SONET multiplexers
- Avionics
- Fiber to the Home
- Optical Applications
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
