Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
500mOhm |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
14.4μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG804 |
Pin Count |
10 |
Operating Supply Voltage |
3V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Analog IC - Other Type |
SINGLE-ENDED MULTIPLEXER |
Operating Supply Current |
3nA |
Nominal Supply Current |
4μA |
Power Dissipation |
14.4μW |
Max Supply Current |
4μA |
Throw Configuration |
4PST |
Propagation Delay |
30 ns |
Turn On Delay Time |
39 ns |
Number of Inputs |
4 |
Bandwidth |
33MHz |
Turn-Off Delay Time |
5 ns |
On-State Resistance (Max) |
650mOhm |
High Level Output Current |
300mA |
Multiplexer/Demultiplexer Circuit |
4:1 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
24pF 105pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
29ns, 6ns |
Charge Injection |
28pC |
Channel-to-Channel Matching (ΔRon) |
40m Ω |
Crosstalk |
-75dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-off Time-Max |
7ns |
Voltage - Supply, Single (V+) |
1.65V~3.6V |
Drain to Source Resistance |
500mOhm |
Signal Current-Max |
0.3A |
Height |
850μm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG804YRMZ Overview
The electronic component is convenient to ship overseas because it is packed in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width). Advanced packaging method Tube is used to provide high reliability. Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have a number of circuits 4:1. Extended operating temperature around -40°C~125°C TA. 10 terminations have been made so far. A 4 channel electronic part produces high-quality output. When the electronic component is given a voltage of 2.5V, it should be turned on and run. As part of the design of the 10 series, this electronic part has been incorporated into the system. On the other hand, analog switches can be constructed using SP4T switching circuits. 1 circuits are used in this analogue multiplexer. ADG804 can be used to search for analog multiplexer variants. A 500mOhm internal resistance characterizes this multiplexer. The functions of 10 pins can be found in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. 1.65V is the lowest voltage that should be fed to the electronic electronic part. This digital switch can be operated with a current of 3nA. A voltage of 1.65V~3.6V is required for this switch device, which drains from a single voltage source. If put voltage greater than 4μA on the device, damage may be caused to the analogue multiplexer. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. The electrical part can be operated at 3V voltage levels. Among the inputs that can be operated are the 4 inputs. 33MHz-bandwidths can be used to transfer data between multiplexers. It has a Drain to Source resistance of 500mOhm ohms.
ADG804YRMZ Features
4 Channels
Switch Circuit: SP4T
3nA Supply Current
Bandwidth: 33MHz
Drain-to-Source resistance: 500mOhm
ADG804YRMZ Applications
There are a lot of Analog Devices Inc. ADG804YRMZ Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- SDH
- Cell phones
- Precision instrumentation
- Battery Powered Systems
- Battery-powered systems
- ATM
- SONET/SDH ADM
- Ultrasound
- Communication systems