Parameters |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
2nA |
Channel Capacitance (CS(off), CD(off)) |
24pF 105pF |
On-state Resistance Match-Nom |
0.4Ohm |
Switch Circuit |
SP4T |
Switch Time (Ton, Toff) (Max) |
29ns, 6ns |
Charge Injection |
28pC |
Channel-to-Channel Matching (ΔRon) |
40m Ω |
Crosstalk |
-75dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
30ns |
Switch-off Time-Max |
7ns |
Voltage - Supply, Single (V+) |
1.65V~3.6V |
Signal Current-Max |
0.3A |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Resistance |
650mOhm |
Max Power Dissipation |
14.4μW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG804 |
Pin Count |
10 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3V |
Number of Channels |
4 |
Interface |
Parallel |
Number of Circuits |
1 |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Operating Supply Current |
3nA |
Power Dissipation |
14.4μW |
Throw Configuration |
4PST |
Logic Function |
Multiplexer |
Supply Type |
Single |
Bandwidth |
33MHz |
Turn-Off Delay Time |
5 ns |
On-State Resistance (Max) |
650mOhm |
High Level Output Current |
300mA |
Multiplexer/Demultiplexer Circuit |
4:1 |
ADG804YRMZ-REEL Overview
Packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 4:1. Around -40°C~125°C TA is the extended operating temperature. Total terminations are 10. A electrical component with 4 channels is capable of high-quality output. Powered by a 2.5V voltage supply, the electrical part should be switched on and run. It is injected into the electrical part body with 10 pins. A SP4T switching circuit is used to build these analog multiplexers. 1 circuits are used in this analogue multiplexer. Look for analog switch ic variants by searching with ADG804. There is 650mOhm internal resistance in this digital multiplexer. Datasheets for functions of 10 pins are available. Multiplexers should not be powered above 3.6V in normal situations. Analog switch ics with Single supply type are cost-effective. There should be 1.65V voltage fed to the electrical part below 1.65V. This multiplexer would work with 3nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~3.6V. There is a voltage range of 3V operating voltages for the electrical part. A 33MHz-bandwidth can be used for data transfer.
ADG804YRMZ-REEL Features
4 Channels
Switch Circuit: SP4T
3nA Supply Current
Bandwidth: 33MHz
ADG804YRMZ-REEL Applications
There are a lot of Analog Devices Inc. ADG804YRMZ-REEL Analog Switches & Multiplexers ICs applications.
- Communications systems
- Audio and video switching
- Video signal routing
- Communication systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- High-Voltage
- Battery-powered systems
- Multi-Line E1 Interface Cards
- Sample-and-hold systems
- Transmit