Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
PRODUCTION (Last Updated: 3 weeks ago) |
Mounting Type |
Surface Mount |
Package / Case |
16-VFQFN Exposed Pad, CSP |
Surface Mount |
YES |
Number of Pins |
16 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Resistance |
650mOhm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
14.4μW |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
2.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ADG811 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Power Supplies |
1.8/3.3V |
Number of Channels |
1 |
Interface |
Parallel |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
1.65V |
Test Frequency |
100kHz |
Power Dissipation |
14.4μW |
Max Supply Current |
4μA |
Turn On Delay Time |
25 ns |
Number of Inputs |
4 |
Supply Type |
Single |
Bandwidth |
90MHz |
Turn-Off Delay Time |
5 ns |
On-State Resistance (Max) |
650mOhm |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
67 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
30pF 35pF |
On-state Resistance Match-Nom |
0.04Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
25ns, 5ns |
Insertion Loss (dB) |
0.05 dB |
Charge Injection |
30pC |
Channel-to-Channel Matching (ΔRon) |
40m Ω |
Crosstalk |
-90dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
30ns |
Switch-off Time-Max |
8ns |
Voltage - Supply, Single (V+) |
1.65V~3.6V |
Normal Position |
NC |
Height Seated (Max) |
1mm |
Length |
3mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Contains Lead |
ADG811YCPZ-REEL7 Overview
The electrical component comes in 16-VFQFN Exposed Pad, CSP packaging, which makes it convenient to ship overseas. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. Electronic part bodies are injected with 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. If you are looking for variants of the digital switch, trying search with ADG811. An switch multiplexer with 650mOhm internal resistance has a value of 650mOhm. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. The lowest voltage the electronic part should receive is 1.65V. Using a single voltage supply, this switch device consumes 1.65V~3.6V volts. A digital multiplexer may suffer damage if voltage is applied above 4μA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. There are 4 inputs to be operated. The data can be transferred over a wide range of bandwidths, called 90MHz bandwidths.
ADG811YCPZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
Bandwidth: 90MHz
ADG811YCPZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG811YCPZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Transmit
- Cell phones
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Multiplexers
- Digital access cross connects
- Digital Cross-Connects
- HDTV
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Audio and video routing